|
|
|
National Stock Number:
5315-01-298-2845
Federal Supply Class:
5315
National Item Identification Number:
012982845
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12333945 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 12333945 | 8U200 | FORTNERS MACHINE SHOP INC DBA FMS INC |
|
Techincal Specification:
| FIRST END COUNTERBORE DEPTH | 0.600 INCHES NOMINAL | | FIRST END COUNTERBORE DIAMETER | 0.360 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED AND COUNTERBORED | | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.063 INCHES MINIMUM AND 0.167 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | S16556-683 MIL STD 10TH MATERIAL RESPONSE OR STMA582,TYPE 416,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.5000 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.000 INCHES NOMINAL | | SECOND END COUNTERBORE DEPTH | 0.600 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.360 INCHES NOMINAL | | SECOND END TAPER ANGLE | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.063 INCHES MINIMUM AND 0.167 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEST DATA DOCUMENT | 18876-12333945 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|