|
|
|
National Stock Number:
5315-01-298-7813
Federal Supply Class:
5315
National Item Identification Number:
012987813
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 500024 | 7X832 | WILLARD CO THE | | 500024 | 8Z037 | TANKINETICS, INC. |
|
Techincal Specification:
| FIRST END LOCATION | THREADED END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 202 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 322 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 403 OR STEEL COMP 405 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 420 OR STEEL COMP 431 OR STEEL COMP 440A OR STEEL COMP 440B OR STEEL COMP 440C OR STEEL COMP 446 OR STEEL COMP 633 OR STEEL COMP 634 OR STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END STYLE | ROUND | | SECOND END OUTER RADIUS | 0.188 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | SHANK LENGTH | 1.120 INCHES NOMINAL | | SHOULDER DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SPECIAL FEATURES | TWO SYMMETRICAL FLATS 0.500 IN. NOM LG 0.312 IN. NOM W ACROSS ON SHOULDER ADJACENT WITH THREAD RUNOUT | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.000 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNF |
|
|