|
|
|
National Stock Number:
5315-01-299-6738
Federal Supply Class:
5315
National Item Identification Number:
012996738
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 375-05-05 ITEM 12 | 63952 | EDERER INC STAR CRANES DIV | | 375-05-05 PART 40-45-28 | 63952 | EDERER INC STAR CRANES DIV | | 375-40-45 ITEM | 63952 | EDERER INC STAR CRANES DIV | | 375-40-45-28 | 63952 | EDERER INC STAR CRANES DIV | | 40-45-28 | 63952 | EDERER INC STAR CRANES DIV |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.375 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5.750 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST END LOCATION | SHOULDER END | | FIRST HOLE DIAMETER | 0.344 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 19.250 INCHES NOMINAL | | MATERIAL | STEEL COMP 4340 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.344 INCHES NOMINAL | | SECOND END STYLE | CHAMFERED | | SHANK DIAMETER | 4.705 INCHES MINIMUM AND 4.716 INCHES MAXIMUM | | SHANK LENGTH | 1.156 INCHES NOMINAL | | SHOULDER DIAMETER | 4.999 INCHES MINIMUM AND 5.000 INCHES MAXIMUM | | SPECIAL FEATURES | IN SHOULDER END DRILL THREE 0.344 INCH NOMINAL DIAMETER LONGITUDINAL HOLES,EQUALLY SPACED ON A 1.500 INCH NOMINAL DIAMETER CIRCLE CIRCUMSCRIBED AROUND AXIAL CENTER,FIRST HOLE 5.938 INCHES NOMINAL DEPTH INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE,TAP WITH 0.125 NATIONAL PIPE THREAD,SECOND HOLE 9.625 INCHES NOMINAL DEPTH INTERSECTING ADDITIONAL 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE EQUIDISTANT 3.688 INCH NOMINAL DISTANCE BETWEEN HOLES,TAP WITH 0.125 NATIONAL PIPE THREAD,THIRD HOLE 13.312 INCHES NOMINAL DEPTH INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE TAP WITH 0.125 NATIONAL PIPE THREAD; ALL THREE PERPENDICULAR HOLES 1.938 INCHES NOMINAL DEPTH; TWO SYMMETRICAL GROOVES PARALLEL TO SHOULDER END 1.125 INCHES FROM END,0.531 INCH NOMINAL WIDTH BY 1.000 INCHES NOMINAL DEPTH; KEYWAY 0.375 INCH NOMINAL WIDTH 0.250 INCH NOMINAL DEPTH 1.625 INCHES NOMINAL LENGTH WITH A FULL RADIUS CORNER | | STYLE DESIGNATOR | UNDERCUT | | SURFACE FINISH | 63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER | | THREAD LENGTH | 1.156 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 12 | | UNDERCUT WIDTH | 0.156 INCHES NOMINAL |
|
|