| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.312 INCHES NOMINAL |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST END STYLE | CHAMFERED |
| FIRST END LOCATION | THREADED END |
| FIRST HOLE DIAMETER | 0.187 INCHES NOMINAL |
| FIRST STEP DIAMETER | 4.000 INCHES NOMINAL |
| FIRST STEP LENGTH | 2.125 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/3,CLASS A OR B OR C OR D,CONDITION 1 OR 2 OR 3 OR 4,TYPE 1 OR 2 OR 3 OR 4 OR 5 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| NOMINAL THREAD SIZE | 1.000 INCHES |
| SECOND END COUNTERBORE DEPTH | 0.500 INCHES NOMINAL |
| SECOND END COUNTERBORE DIAMETER | 3.500 INCHES MINIMUM AND 3.505 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.187 INCHES NOMINAL |
| SECOND END STYLE | COUNTERBORED W/O THRU HOLE |
| SECOND STEP DIAMETER | 1.9995 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| SECOND STEP LENGTH | 4.375 INCHES NOMINAL |
| SPECIAL FEATURES | INTERNAL RETAINING RING GROOVE LOCATED IN SHOULDER; SECOND STEP DIAMETER TAPERED ADJACENT TO FIRST STEP 2.500 INCHES NOMINAL LONG WITH A 0.031 INCH NOMINAL TOLERANCE RELIEF; 0.062 INCH NOMINAL RADIUS 0.062 INCH NOMINAL DEEP THREAD RELIEF |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 16.0 MICROINCHES SHANK END |
| SURFACE FINISH | 16.0 MICROINCHES LONG SHANK |
| SURFACE FINISH | 63.0 MICROINCHES SHOULDER BEARING SURFACE |
| SURFACE FINISH | 63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER |
| THREAD DIRECTION | RIGHT-HAND |
| THIRD STEP DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| THIRD STEP LENGTH | 2.312 INCHES NOMINAL |
| THREAD CLASS | 2A |
| THREAD LENGTH | 0.969 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |