|
|
|
National Stock Number:
5315-01-303-1016
Federal Supply Class:
5315
National Item Identification Number:
013031016
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 116037-4 | 82340 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629,COND H-1000 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320 CLASS 2D,0.0002 - 0.0004 THICKNESS FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | RADIUS | | FIRST END CORNER RADIUS | 0.040 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.078 INCHES MINIMUM AND | | 0.082 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.078 INCHES MINIMUM AND | | 0.082 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.350 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.640 INCHES MINIMUM AND | | 1.660 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.090 INCHES MINIMUM AND | | 2.110 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.4350 INCHES MINIMUM AND | | 0.4360 INCHES MAXIMUM | | SPECIAL FEATURES | WITHIN HALF HOUR AFTER PLATING,PIN SHALL BE BAKED FOR A MINIMUM OF TWELVE HOURS AT 350.0 DEGREES MINIMUM TO 400.0 DEGREES MAXIMUM FAHRENHEIT TO PROVIDE HYDROGEN EMBRITTLEMENT RELIEF; APPLY SOLID DRY FILM LUBRICANT PER EF 98. EDO REPORT 5370: 0.0003 - 0.0005 THICK PER SURFACE OVER DIMENSIONS SHOWN; PAINT ONLY SURFACE INDICATED ON J END WITH ONE COAT OF PRIMER PER MIL-P-23377 AND TWO COATS OF POLYURETHANE PER MIL-C-83286,COLOR NUMBER 17875 INSIGNIA WHITE |
|
|