| CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.130 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END LOCATION | SHORT SHANK END |
| FIRST HOLE DIAMETER | 0.165 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 6.780 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD ALL MATERIAL RESPONSES OR ASTM A331 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.165 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.190 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 1.640 INCHES NOMINAL |
| SHANK DIAMETER | 0.740 INCHES MINIMUM AND 0.742 INCHES MAXIMUM |
| SHANK LENGTH | 4.640 INCHES NOMINAL |
| SHOULDER DIAMETER | 1.500 INCHES NOMINAL |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |