|
|
|
National Stock Number:
5315-01-307-1856
Federal Supply Class:
5315
National Item Identification Number:
013071856
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 6289672 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.840 INCHES MINIMUM AND | | 1.960 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.502 INCHES MINIMUM AND | | 0.506 INCHES MAXIMUM | | SHANK DIAMETER | 0.480 INCHES MINIMUM AND | | 0.490 INCHES MAXIMUM | | OVERALL LENGTH | 11.000 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 1.750 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.081 INCHES MINIMUM AND | | 0.084 INCHES MAXIMUM | | FIRST END LOCATION | SHOULDER END | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 10.000 INCHES NOMINAL |
|
|