|
|
|
National Stock Number:
5315-01-309-7188
Federal Supply Class:
5315
National Item Identification Number:
013097188
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 2527243-1 | 98889 | AEROCONTROLEX GROUP, INC. |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.204 INCHES MINIMUM AND | | 1.234 INCHES MAXIMUM | | DIAMETER | 0.186 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 8740 OR | | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD 1ST MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR | | AMS 6370 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | TIN OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727,TYPE 2 0.0002-0.0004 THICK MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.042 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.307 INCHES MINIMUM AND | | 0.317 INCHES MAXIMUM | | HEIGHT | 0.042 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.066 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|