| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.148 INCHES NOMINAL |
| CHAMFER LENGTH | 0.078 INCHES NOMINAL |
| DIAMETER | 0.745 INCHES MINIMUM AND 0.747 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| HARDNESS RATING | 26.5 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.125 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4037 OVERALL |
| SHEAR STRENGTH | 66280 DOUBLE POUNDS PER SQUARE INCH |
| PIN HEAD DIAMETER | 0.875 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| SPECIFICATION/STANDARD DATA | 96906-MS20392-10C97 GOVERNMENT STANDARD |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDER HEAD LENGTH | 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM |