|
|
|
National Stock Number:
5315-01-330-9957
Federal Supply Class:
5315
National Item Identification Number:
013309957
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10123290 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5315PL1063291 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 8984125 | 18894 | AIR ARMAMENT CENTER/ EN | | 8984125 | 32067 | MARVIN ENGINEERING CO, INC | | 8984125 | 76301 | THE BOEING COMPANY | | 8984125 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
|
Techincal Specification:
| CHAMFER LENGTH | 0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM | | DIAMETER | 0.0915 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.042 INCHES MINIMUM AND 0.047 INCHES MAXIMUM | | HEAD STYLE | FLAT | | HEIGHT | 0.030 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PIN HEAD DIAMETER | 0.250 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL | | UNDER HEAD LENGTH | 0.377 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
|
|