|
|
|
National Stock Number:
5315-01-330-9973
Federal Supply Class:
5315
National Item Identification Number:
013309973
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 9004-624 | 00994 | COLUMBUS JACK CORPORATION | | 9004-624 | 02708 | AGE LOGISTICS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.750 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.940 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.380 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 4340 OVERALL | | PIN OVERALL DIAMETER | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | PIN OVERALL LENGTH | 7.190 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.380 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 1 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
|
|