|
|
|
National Stock Number:
5315-01-332-7491
Federal Supply Class:
5315
National Item Identification Number:
013327491
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 1480AS108-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CHAMFER LENGTH | 0.060 INCHES NOMINAL0.060 INCHES NOMINAL | | DIAMETER | 0.559 INCHES MINIMUM AND 0.559 INCHES MINIMUM AND 0.561 INCHES MAXIMUM0.561 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.220 INCHES MINIMUM AND 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM0.250 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.220 INCHES NOMINAL0.220 INCHES NOMINAL | | HEAD STYLE | FLAT CHAMFERFLAT CHAMFER | | HEIGHT | 0.120 INCHES NOMINAL0.120 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLEDONE END DRILLED | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.880 INCHES NOMINAL0.880 INCHES NOMINAL | | SPECIAL FEATURES | LOCATED UNDER HEAD OF PIN 0.575 IN. DIA. STRAIGHT KNURL; GREASE CHANNEL 0.440 IN. NOMINAL DEEP,TAP 0.120 NPT,0.120 IN. DIA. HOLE,1.380 IN. DEEP INTERSECTED BY PERPENDICULAR DRILL HOLE 0.130 IN. DIAMETERLOCATED UNDER HEAD OF PIN 0.575 IN. DIA. STRAIGHT KNURL; GREASE CHANNEL 0.440 IN. NOMINAL DEEP,TAP 0.120 NPT,0.120 IN. DIA. HOLE,1.380 IN. DEEP INTERSECTED BY PERPENDICULAR DRILL HOLE 0.130 IN. DIAMETER | | STYLE DESIGNATOR | STRAIGHTSTRAIGHT | | UNDER HEAD LENGTH | 2.590 INCHES NOMINAL2.590 INCHES NOMINAL |
|
|