| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.360 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| FIRST END LOCATION | THREADED END |
| FIRST HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.875 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| LENGTH | 0.090 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.720 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1045 OR STEEL COMP 1137 OR STEEL COMP 1141 OVERALL |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND STEP LENGTH | 1.000 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.744 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SPECIAL FEATURES | 0.090 IN. WIDE 0.734 IN. NOMINAL DIA. UNDERCUT BETWEEN FIRST STEP AND SHOULDER |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633 ASSN STD 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THIRD STEP DIAMETER | 0.619 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.860 INCHES NOMINAL |
| THREAD CLASS | 2A |
| THREAD LENGTH | 0.700 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNC |