|
|
|
National Stock Number:
5315-01-337-6168
Federal Supply Class:
5315
National Item Identification Number:
013376168
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6532B068-1 | 0MHC4 | NAVPAR INC | | 6532B068-1 | 36334 | INDAL TECHNOLOGIES INC. | | 6532B068-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | 6532B068-1 | 95169 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | 6532B068-1 | 9Y957 | FLUIDYNE CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 3.400 INCHES NOMINAL | | PIN OVERALL DIAMETER | 1.3730 INCHES MINIMUM AND | | 1.3740 INCHES MAXIMUM | | SPECIAL FEATURES | 0,060 IN. DEEP 0.250 IN. WIDTH AXIAL LOCKING GROOVE ON BOTH ENDS |
|
|