| FIRST END STYLE | OVAL |
| HEAD STYLE | MODIFIED PAN (R1, R2, R3 NOT REQUIRED FOR ITEM DESCRIPTION) |
| MATERIAL | STEEL COMP XM-12 OVERALL |
| STYLE DESIGNATOR | GROOVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13001 CAGEC 18355 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| DIAMETER | 0.8740 INCHES MINIMUM AND |
| 0.8745 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.814 INCHES NOMINAL |
| UNDER HEAD LENGTH | 2.497 INCHES MINIMUM AND |
| 2.507 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.060 INCHES NOMINAL |
| PIN HEAD DIAMETER | 1.180 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND |
| 0.082 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.076 INCHES MINIMUM AND |
| 0.082 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.118 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 37.0 DEGREES MINIMUM AND |
| 47.0 DEGREES MAXIMUM |
| SPECIAL FEATURES | 0.498 IN. MIN. 0.507 IN. MAX. DIA. HOLE THRU HEAD |