|
|
|
National Stock Number:
5315-01-351-1437
Federal Supply Class:
5315
National Item Identification Number:
013511437
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 211058336 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 556-6409160-40 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.425 INCHES NOMINAL | | SHOULDER DIAMETER | 0.520 INCHES NOMINAL | | SHANK DIAMETER | 0.3643 INCHES MINIMUM AND | | 0.3737 INCHES MAXIMUM | | OVERALL LENGTH | 3.750 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.375 INCHES MINIMUM AND | | 0.380 INCHES MAXIMUM | | SECOND SHANK LENGTH | 3.050 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | THREADED END | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.375 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.870 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.120 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.500 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | 0.302 IN. MIN. 0.312 IN. MAX,UNDERCUT LOCATED ON THREADED END |
|
|