| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.770 INCHES MINIMUM AND 2.800 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A 108 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 OVERALL |
| PIN OVERALL DIAMETER | 0.1860 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 3.100 INCHES NOMINAL |
| SECOND END COUNTERBORE DEPTH | 0.029 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| SECOND END COUNTERBORE DIAMETER | 0.037 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED AND COUNTERBORED |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |