|
|
|
National Stock Number:
5315-01-465-9712
Federal Supply Class:
5315
National Item Identification Number:
014659712
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 6916196 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| HEAD STYLE | FLAT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | PIN HEAD DIAMETER | 1.000 INCHES NOMINAL | | HEIGHT | 0.342 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.128 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.128 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.342 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.623 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | SPECIAL FEATURES | OVERALL LENGTH OF PIN IS4.307 INCHES; BOTH ENDS OF PIN HAVE A CHAMFER OF 0.100 INCHES, 45 DEGREES |
|
|