|
|
|
National Stock Number:
5315-01-467-0349
Federal Supply Class:
5315
National Item Identification Number:
014670349
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 92007A0309 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER |
|
Techincal Specification:
| FIRST HOLE DIAMETER | 0.064 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SPECIAL FEATURES | ALL SHARP EDGES AND CORNERS SHALL BE BROKEN .003 TO .015 UNLESS OTHERWISE SPECIFIED, HEAT TREAT IAW MIL-H-6875, AGE HARDEN TO 33-38 ROCKWELL "C", PART SHALL BE MAGNETIC PARTICLE INSPECTED IAW MIL-STD-1949 WITH NO CRACKS OR SEAMS OR LAPS ALLOWED, FINISH CLEAN AND PASSIVATE 5.4.1 OF MIL-STD-171 EXCEPT CORROSION TEST IAW QQ-P-35 SHALL NOT APPLY | | PIN OVERALL DIAMETER | 0.1860 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.720 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL |
|
|