|
|
|
National Stock Number:
5315-01-469-0292
Federal Supply Class:
5315
National Item Identification Number:
014690292
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 12374396 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 12374396 | 0C9L5 | GENERAL DYNAMICS LAND SYSTEMS CUSTOMER SERVICE & SUPPORT COMPANY | | 12374396 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5630,CLASS440C ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 56.0 ROCKWELL C MINIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.220 INCHES MINIMUM AND | | 0.280 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.376 INCHES MINIMUM AND | | 0.377 INCHES MAXIMUM | | SHANK DIAMETER | 0.375 INCHES MINIMUM AND | | 0.376 INCHES MAXIMUM | | OVERALL LENGTH | 0.870 INCHES MINIMUM AND | | 0.930 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL | | SECOND END TAPER ANGLE | 28.0 DEGREES MINIMUM AND | | 32.0 DEGREES MAXIMUM | | FIRST END LOCATION | LONG END | | SPECIAL FEATURES | SHANK HEAD CONICAL;HEAT TREATMENT MIL-H-6875, QUENCH AND TEMPER AT A MAXIMUM TEMPERATURE OF 450 DEGREES;FINISH CLEAN AND PASSIVATE 5.4.1 OF MIL-STD-171;ALL FILLET RADII SHALL BE .005 TO .030 UNLESS OTHERWISE SPECIFIED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,STRAIGHT, HEADLESS |
|
|