| ANGLE BETWEEN CENTERLINE OF HOLES | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | THREADED END |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.027 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,CONDF4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4130 OVERALL |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SECOND END CORNER RADIUS | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| SECOND END STYLE | RADIUS |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SPECIAL FEATURES | OVERALL LENGTH IS 3.5 INCHES;THREADS PER MIL-S-8879;SHARP EXTERNAL CORNERS SHALL HAVE A .005 TO .015 INCH RADIUS OR .005 INCH BY 45 DEGREE CHAMFER;HEAT TREAT TO 160-180 KSI PER MIL-H-6875;SOLID FILM LUBE ALL SURFACES PER MIL-L-46010, EXEPT THREADS;MAGNETIC PARTICLE INSPECTION PER ASTM E 1444;SHOULDER 0.047 INCHES WIDE;SMALL END DIAMETER 0.317 NOMINALLY |
| STYLE DESIGNATOR | THREADED AT SMALL END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TYPEM,CL3,ORTYPER TYPE Z, CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE OVERALL |
| TAPER LENGTH | 2.860 INCHES MINIMUM AND 2.891 INCHES MAXIMUM |
| TAPER MAJOR DIAMETER | 0.500 INCHES NOMINAL |
| TAPER MINOR DIAMETER | 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM |
| TAPER | 0.500 PER FOOT IN INCHES |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.406 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNJF |