|
|
|
National Stock Number:
5315-01-475-5120
Federal Supply Class:
5315
National Item Identification Number:
014755120
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 12387350-5C55 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CHAMFER LENGTH | 0.078 INCHES NOMINAL | | DIAMETER | 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.062 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL | | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | SHEAR STRENGTH | 16160 DOUBLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | ITEM ALTERED FROMMS20392 NO CADMIUM PLATING;SHANK END OF PINS MAY BE CHAMFERED OR A RADIUS OF .031;PINS SHALL BE FREE OF BURRS AND SHARP EDGES;DRILLED HOLE ON SHANK END OF PIN 0.108 IN DIAMETER PLACED 1.719 INCHES FROM UNDER HEAD;SURFACE TREATMENT ZINC PER ASTM B633, TYPE 2, SUPPLEMANTARY CHROMATE TREATMENT, NORMAL COLOR NOT BLEACHED OR CLEAR | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | | | SURFACE TREATMENT | | | UNDER HEAD LENGTH | 1.969 INCHES NOMINAL |
|
|