| DIAMETER | 0.2479 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES NOMINAL |
| EFFECTIVE LENGTH | 1.185 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.037 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE SHANK |
| MATERIAL | STEEL COMP XM-13 SHANK |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, HINGE-MLG OUTBD DOOR, AFT CTR FUS |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND UNDERCUT DIAMETER | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND UNDERCUT RADIUS | 0.030 INCHES NOMINAL |
| SPECIAL FEATURES | FINISH PER STF1750; APPLY DRY FILM LUBRICATION PER PS18021; HEAT TREAT TO H1000 CONDITION PER PS15238;NEXT ASSY 74A425100; FIRST END THREADED 0.1900-32 UNJF-31 PER MIL-S-8879 |
| STYLE DESIGNATOR | GROOVE |
| UNDERCUT DIAMETER | 0.136 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| UNDERCUT RADIUS | 0.060 INCHES NOMINAL |
| UNDER HEAD LENGTH | 1.710 INCHES NOMINAL |