|
|
|
National Stock Number:
5315-01-477-5045
Federal Supply Class:
5315
National Item Identification Number:
014775045
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 8100-1256-0262 | 70876 | BATH IRON WORKS CORPORATION | | 8100-1256-0262 PC 69 | 70876 | BATH IRON WORKS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | Q-S-763,TYPE316,CONDA FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | OVERALL LENGTH | 4.000 INCHES NOMINAL | | DIAMETER | 1.498 INCHES MINIMUM AND | | 1.500 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | FIRST END LOCATION | CHAMFERED END | | SPECIAL FEATURES | PIN HAS CENTER GROOVE3/16 WIDE 1.75 INCHES FROM CHAMFERED END;3/16 DIAMETER THRU HOLE IN CENTER OF GROOVE;GROOVE HAS RADIUS OF 1/8 ON EACH END;PIN HAS SECOND THRU HOLE 3.75 IN FROM CHAMFERED END;DRILL 1/4 DIAMETER 2 1/2 DEEP, DRILL 11/32 DIA AND 1/2 DEEP, TAP 1/8-27 DRYSEAL;NPSI5/16 DEEP | | PART NAME ASSIGNED BY CONTROLLING AGENCY | DOG PIN |
|
|