| CRITICALITY CODE JUSTIFICATION | AGAV |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST END LOCATION | THREADED END |
| FIRST STEP WIDTH ACROSS FLATS | 0.313 INCHES NOMINAL |
| LENGTH | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM SHOULDER |
| OVERALL LENGTH | 2.540 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 615 OVERALL |
| NOMINAL THREAD SIZE | 0.3125 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-NO. 1 BEARING SEAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND STEP LENGTH | 1.020 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.520 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SPECIAL FEATURES | THRU HOLES AT BOTH ENDS 0.065-0.072 IN. DIA |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2406 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMIUM OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THIRD STEP DIAMETER | 0.184 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.830 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.435 INCHES NOMINAL |
| THREAD PITCH DIAMETERS | +0.2797 TO 0.2824 INCHES |
| THREAD SERIES DESIGNATOR | UNS |
| THREAD QUANTITY PER INCH | 24 |