|
|
|
National Stock Number:
5315-01-481-8540
Federal Supply Class:
5315
National Item Identification Number:
014818540
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 122-2420529 PIECE 72 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, AL 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.156 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.156 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.219 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.875 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.312 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.7490 INCHES MINIMUM AND | | 0.7510 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIVOT PIN |
|
|