|
|
|
National Stock Number:
5315-01-481-9214
Federal Supply Class:
5315
National Item Identification Number:
014819214
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 122-2404638 PC 43 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | MS51932-5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1117 OR | | STEEL COMP 1118 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.122 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.006 INCHES NOMINAL | | PIN OVERALL LENGTH | 1.250 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2480 INCHES MINIMUM AND | | 0.2500 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS51932-5 |
|
|