| DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM |
| CHAMFER LENGTH | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| HEAD INSIDE DIAMETER | 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| HEAD STYLE | EYE |
| HEAD WIDTH | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY X-750 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RETAINER, PIN |
| PIN HEAD DIAMETER | 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 0.150 RADIANS MINIMUM AND 0.190 RADIANS MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SLOT LENGTH | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SLOT WIDTH | 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| UNDER HEAD LENGTH | 1.450 INCHES MINIMUM AND 1.470 INCHES MAXIMUM |