|
|
|
National Stock Number:
5315-01-496-6364
Federal Supply Class:
5315
National Item Identification Number:
014966364
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 596-7409326-7 | 53711 | NAVAL SEA SYSTEMS COMMAND | | B541-1113-7 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5845 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM-F562 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5758 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COBALT COMP MP-35-N OVERALL | | PIN OVERALL DIAMETER | 1.5000 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.750 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END CORNER RADIUS | 0.190 INCHES NOMINAL | | SECOND END STYLE | RADIUS | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | PIN HAS ONE COUNTERSUNK, THREADED HOLE WITH DIAMETER OF .52-.54 INCHES ON SECOND END OF PIN | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
|
|