|
|
|
National Stock Number:
5315-01-498-2560
Federal Supply Class:
5315
National Item Identification Number:
014982560
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 3637AS623-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.250 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | AGAV | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582, TYPE 303, COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, LIFT MODULE - IDLER | | PIN OVERALL DIAMETER | 0.7500 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.750 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SPECIAL FEATURES | HOLES DRILLED 0.380 IN. DEEP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A967, TREATMENT NITRIC 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|