|
|
|
National Stock Number:
5315-01-498-4644
Federal Supply Class:
5315
National Item Identification Number:
014984644
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 423296-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643, 17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, HOLDBACK BAR ASSEMBLY S-3 | | PIN OVERALL DIAMETER | 0.5582 INCHES MINIMUM AND 0.5593 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.500 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | UNDERCUT FOR LENGTH OF 2.800 IN. FROM ONE END WITH RADIUS OF 0.030 IN. TO DIAMETER OF 0.4982-0.4993 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, FINISH 5.4.1 MIL STD 1ST TREATMENT RESPONSE AND MIL-L-46010, TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE AND LUBRICANT OVERALL |
|
|