|
|
|
National Stock Number:
5315-01-500-2503
Federal Supply Class:
5315
National Item Identification Number:
015002503
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 7345110 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| FIRST END LOCATION | THREADED END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | OVERALL LENGTH | 2.990 INCHES MINIMUM AND 3.000 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281, CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 400 OVERALL | | NOMINAL THREAD SIZE | 0.3125 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,STOP,PINCH ROLLER | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.250 INCHES NOMINAL | | SECOND SHANK LENGTH | 2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM | | SHANK DIAMETER | 0.311 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | SHANK LENGTH | 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNC | | UNDERCUT DIAMETER | 0.240 INCHES NOMINAL | | UNDERCUT WIDTH | 0.060 INCHES NOMINAL |
|
|