|
|
|
National Stock Number:
5315-01-507-1930
Federal Supply Class:
5315
National Item Identification Number:
015071930
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| S8152N32-0-520 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND END TAPER LENGTH | 0.010 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SURFACE FINISH | 40.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 0.520 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1870 INCHES MINIMUM AND | | 0.1872 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STRAIGHT HEADLESS |
|
|