|
|
|
National Stock Number:
5315-01-530-6563
Federal Supply Class:
5315
National Item Identification Number:
015306563
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 11415C3C2-4 | 59563 | REID PRODUCTS INC. | | 3M943C3C2-4 | 06725 | SPS TECHNOLOGIES, LLC | | 3M943C3C2-4 | 56878 | SPS TECHNOLOGIES, LLC | | 3M943C3C2-4 | 56946 | G.S. PRECISION, INC. | | 3M943C3C2-4 | 59563 | REID PRODUCTS INC. | | 3M943C3C2-4 | 73197 | HI-SHEAR CORPORATION | | VS3258C3C2-4 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | 3M943C3C2-4 | 76301 | THE BOEING COMPANY | | AAP139C3C2-4 | 84256 | AVIBANK MFG., INC. | | 3M943C3C2-4 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | 3M943C3C2-4 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST END TIP RADIUS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 0.845 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,INDEX | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND SHANK DIAMETER | 0.185 INCHES MINIMUM AND 0.186 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.250 INCHES NOMINAL | | SHANK DIAMETER | 0.189 INCHES NOMINAL | | SHANK LENGTH | 0.125 INCHES NOMINAL | | SHOULDER DIAMETER | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|