|
|
|
National Stock Number:
5315-01-548-6613
Federal Supply Class:
5315
National Item Identification Number:
015486613
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS20392-2S83 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-2S83 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| UNDER HEAD LENGTH | 2.742 INCHES NOMINAL | | DIAMETER | 0.188 INCHES NOMINAL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | CHAMFER LENGTH | 0.046 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEIGHT | 0.046 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.184 INCHES NOMINAL |
|