|
|
|
National Stock Number:
5315-01-586-8174
Federal Supply Class:
5315
National Item Identification Number:
015868174
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MIL-P-5673 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20392 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20392-3P45 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM20392-3P45 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-3P45 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DIAMETER | 0.246 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.062 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.375 INCHES NOMINAL | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.062 INCHES NOMINAL | | SPECIAL FEATURES | FINISH MATERIAL - CLEANED DESCALED, THREAD SERIES DESIGNATOR - UNS-S13800 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STRAIGHT, HEADED, DRILLED SHANK |
|
|