|
|
|
National Stock Number:
5315-12-177-7231
Federal Supply Class:
5315
National Item Identification Number:
121777231
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 1X8DIN94-1-4305 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 1X8DIN94X12CRNIS188 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-1X8-1.4305 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-1X8-A4-50 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-1X8-A4-70 | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-177-7231 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M | | NO PRIMARY REF 121777231 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 0.8 MILLIMETERS MINIMUM AND 0.9 MILLIMETERS MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN267TEIL11, FESTIGKEIT 70 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP A4 OVERALL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR EXTENDED PRONG CHISEL | | STYLE DESIGNATOR | STANDARD | | TEST DATA DOCUMENT | D8286DIN94/SE+83/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDERLOOP LENGTH | 7.25 MILLIMETERS MINIMUM AND 8.75 MILLIMETERS MAXIMUM |
|
|