|
|
|
National Stock Number:
5315-12-355-6652
Federal Supply Class:
5315
National Item Identification Number:
123556652
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| ISO2340-B-10X70-ST-A2P | I9008 | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 4,5 MILLIMETERS MINIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 61,0 MILLIMETERS MAXIMUM | | FIRST END TAPER ANGLE | 30,0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 2,0 MILLIMETERS MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 3,2 MILLIMETERS NOMINAL | | HARDNESS RATING | 125,0 VICKERS MINIMUM AND 245,0 VICKERS MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 10,0 MILLIMETERS NOMINAL | | PIN OVERALL LENGTH | 70,0 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 3,2 MILLIMETERS NOMINAL | | SURFACE FINISH | 3,2 MICRONS OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ISO 4042, A2P ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL |
|
|