|
|
|
National Stock Number:
5315-21-907-8898
Federal Supply Class:
5315
National Item Identification Number:
219078898
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10552533 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 5.0 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 23.0 MILLIMETERS MINIMUM AND 25.0 MILLIMETERS MAXIMUM | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 2.0 MILLIMETERS MINIMUM AND 2.5 MILLIMETERS MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 4.0 MILLIMETERS MINIMUM AND 4.3 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH ENDS DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 15.97 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM | | PIN OVERALL LENGTH | 35.0 MILLIMETERS NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 4.0 MILLIMETERS MINIMUM AND 4.3 MILLIMETERS MAXIMUM | | SPECIAL FEATURES | UNTREATED |
|
|