| DIAMETER | 38.45 MILLIMETERS MINIMUM AND 38.55 MILLIMETERS MAXIMUM |
| EFFECTIVE LENGTH | 108.00 MILLIMETERS NOMINAL |
| FIRST END LOCATION | CHAMFERED END |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 1.85 MILLIMETERS MINIMUM AND 2.15 MILLIMETERS MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| MATERIAL DOCUMENT AND CLASSIFICATION | EN10083 GRADE 605-36 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| OVERALL LENGTH | 195.60 MILLIMETERS MINIMUM AND 196.40 MILLIMETERS MAXIMUM |
| SECOND END STYLE | SLOTTED |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END SLOT DEPTH | 13.35 MILLIMETERS MINIMUM AND 14.15 MILLIMETERS MAXIMUM |
| SECOND END SLOT WIDTH | 13.85 MILLIMETERS MINIMUM AND 14.15 MILLIMETERS MAXIMUM |
| SECOND UNDERCUT WIDTH | 4.00 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | CHAMFERED END W/HOLE 4MM DIA,158MM DEEP & THEN THD M8X1.25 FOR 12MM DEEP FROM END;PAINTED SLOTTED END |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 3.2 MICRONS OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF STAN 03-20 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ZINC AND PASSIVATE OVERALL |
| UNDERCUT DIAMETER | 34.50 MILLIMETERS NOMINAL |
| UNDERCUT RADIUS | 2.00 MILLIMETERS NOMINAL |
| UNDERCUT WIDTH | 4.00 MILLIMETERS NOMINAL |