| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 10.85 MILLIMETERS MINIMUM AND 11.15 MILLIMETERS MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 107.60 MILLIMETERS MINIMUM AND 108.40 MILLIMETERS MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.85 MILLIMETERS MINIMUM AND 1.15 MILLIMETERS MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 12.00 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS970 GRADE 070-20 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | RORS BLADE EXTENSION RETAINER |
| PIN OVERALL DIAMETER | 19.85 MILLIMETERS MINIMUM AND 20.15 MILLIMETERS MAXIMUM |
| PIN OVERALL LENGTH | 129.60 MILLIMETERS MINIMUM AND 130.40 MILLIMETERS MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 12.00 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | FLAT OVER HOLE 30MM LG BOTH ENDS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF STAN 03-11 NATIONAL SPEC 1ST TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE AND PAINT OVERALL |