| DIAMETER | 59.60 MILLIMETERS MINIMUM AND 59.71 MILLIMETERS MAXIMUM |
| EFFECTIVE LENGTH | 109.85 MILLIMETERS MINIMUM AND 110.15 MILLIMETERS MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 1.85 MILLIMETERS MINIMUM AND 2.15 MILLIMETERS MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 7.85 MILLIMETERS MINIMUM AND 8.15 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS 970,PART1,GRADE 605-36,CONDITION T FED SPEC 1ST MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN HEAD DIAMETER | 69.85 MILLIMETERS MINIMUM AND 70.15 MILLIMETERS MAXIMUM |
| SECOND END COUNTERBORE DEPTH | 1.85 MILLIMETERS MINIMUM AND 2.15 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | W/SINGLE SLOT; PAINTED ENDS;HEAD SURFACE LOCATION |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 3.2 MICRONS OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DEF-STAN 03-20 MIL STD 1ST TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMATE ZINC OVERALL AND PAINT OVERALL |
| UNDERCUT DIAMETER | 49.85 MILLIMETERS MINIMUM AND 50.15 MILLIMETERS MAXIMUM |
| UNDER HEAD LENGTH | 128.00 MILLIMETERS NOMINAL |
| UNDERCUT WIDTH | 10.15 MILLIMETERS MAXIMUM |