|
|
|
National Stock Number:
5315-99-206-6780
Federal Supply Class:
5315
National Item Identification Number:
992066780
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 36811 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | 870-50113 | K7705 | KNDS DEFENCE UK LIMITED | | MEXE36811 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.300 INCHES NOMINAL | | DATE OF PRECEDING RECORD | 91085 | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.156 INCHES NOMINAL | | FORMER TYPE CODE | K | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DEF 13 GROUP 5G MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.9980 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM | | PIN OVERALL LENGTH | 8.800 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.156 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES ALL OTHER SURFACES | | SURFACE FINISH | 250.0 MICROINCHES BOTH ENDS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CLEAN SHERARDISE,BS4921-1988 CLASS 1 COATING,MAX THK 0.002 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|