|
|
|
National Stock Number:
5315-99-207-1764
Federal Supply Class:
5315
National Item Identification Number:
992071764
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 36810 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | 870-50103 | K7705 | KNDS DEFENCE UK LIMITED | | MEXE36810 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | MEXE36810 | K7705 | KNDS DEFENCE UK LIMITED |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.800 INCHES MINIMUM AND 6.820 INCHES MAXIMUM | | DATE OF PRECEDING RECORD | 91085 | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.531 INCHES NOMINAL | | FORMER TYPE CODE | K | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | BSI,BS970 PT1 826-40 Y NATIONAL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 1.9970 INCHES MINIMUM AND 1.9990 INCHES MAXIMUM | | PIN OVERALL LENGTH | 8.110 INCHES MINIMUM AND 8.130 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.531 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE FINISH | 250.0 MICROINCHES BOTH ENDS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BS4921 CLASS1 COATING MAX THK 0.002 AND PASSIVATE NATIONAL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | SHERARDISE |
|
|