|
|
|
National Stock Number:
5315-99-207-4152
Federal Supply Class:
5315
National Item Identification Number:
992074152
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 870-50192 | K7705 | KNDS DEFENCE UK LIMITED | | B27449 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | MEXEB27449 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| DIAMETER | 1.1251 INCHES MINIMUM AND 1.1256 INCHES MAXIMUM | | EFFECTIVE LENGTH | 3.867 INCHES NOMINAL | | CHAMFER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM | | GRIP LENGTH | 3.906 INCHES MINIMUM AND 3.969 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | DEF 13, GROUP 5G NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN HEAD DIAMETER | 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | 3.867 IN. EFFECTIVE LENGTH | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | ERR-060 SHANK END | | SURFACE TREATMENT | ZINC OVERALL AND CHROMATE OVERALL | | TEST DATA DOCUMENT | K0237-MFD18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNDER HEAD LENGTH | 4.219 INCHES MAXIMUM AND 4.281 INCHES MAXIMUM |
|
|