|
|
|
National Stock Number:
5315-99-207-4191
Federal Supply Class:
5315
National Item Identification Number:
992074191
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 870-50170 | K7705 | KNDS DEFENCE UK LIMITED | | A25780 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | MEXEA25780 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| TEST DATA DOCUMENT | K0237-MFD18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.031 INCHES MINIMUM AND 2.094 INCHES MAXIMUM | | DATE OF PRECEDING RECORD | 05255 | | FIRST END STYLE | SQUARE | | FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM | | FORMER TYPE CODE | K | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DEF 13 GROUP 5G MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.4980 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.406 INCHES MINIMUM AND 2.469 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM | | SPECIAL FEATURES | CLEAN SHERARDISE,BS4921-1988 CLASS 1 COATING,MAX THK 0.002 AND PASSIVATE | | SURFACE FINISH | 63.0 MICROINCHES SHANK END |
|
|