|
|
|
National Stock Number:
5315-99-207-7919
Federal Supply Class:
5315
National Item Identification Number:
992077919
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 37041 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | 870-50095 | K7705 | KNDS DEFENCE UK LIMITED | | MEXE37041 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DEF 13 GROUP 5G DEF STAN/SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 1.2480 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM | | PIN OVERALL LENGTH | 5.720 INCHES MINIMUM AND 5.780 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SPECIAL FEATURES | SHERARDISE,BS4921-CLASS 1 COATING,MAX THK 0.002 AND PASSIVATE |
|
|