|
|
|
National Stock Number:
5315-99-207-8062
Federal Supply Class:
5315
National Item Identification Number:
992078062
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 870-50142 | K7705 | KNDS DEFENCE UK LIMITED | | B25772 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | MEXEB25772 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.407 INCHES MINIMUM AND 8.469 INCHES MAXIMUM | | DATE OF PRECEDING RECORD | 05255 | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.203 INCHES NOMINAL | | FORMER TYPE CODE | K | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | BS970 PT 1 GRADE 826 -40 CONDITION Y NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 1.2480 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM | | PIN OVERALL LENGTH | 9.031 INCHES MINIMUM AND 9.093 INCHES MAXIMUM | | PREVIOUS FEDERAL SUPPLY CLASSIFICATION | 5420 | | PREVIOUS ITEM NAME | SHAFT,STRAIGHT | | SECOND HOLE DIAMETER | 0.203 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE FINISH | 250.0 MICROINCHES BOTH ENDS |
|
|