|
|
|
National Stock Number:
5315-99-208-7675
Federal Supply Class:
5315
National Item Identification Number:
992087675
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 870-50261 | K7705 | KNDS DEFENCE UK LIMITED | | A27025 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE | | MEXEA27025 | K0973 | MINISTRY OF DEFENCE PROCUREMENT EXECUTIVE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.219 INCHES MINIMUM AND 5.281 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.203 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | DEF 13 GROUP 2 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.7480 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM | | PIN OVERALL LENGTH | 5.719 INCHES MINIMUM AND 5.781 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.203 INCHES NOMINAL | | SPECIAL FEATURES | CLEAN SHERARDISE,BS4921 1988 CLASS 1 COATING MAX THK 0.002 AND PASSIVATE | | SURFACE FINISH | 63.0 MICROINCHES |
|
|