| DIAMETER | 29.75 MILLIMETERS MINIMUM AND 29.85 MILLIMETERS MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 10.50 MILLIMETERS NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 53.50 MILLIMETERS NOMINAL |
| CHAMFER LENGTH | 3.00 MILLIMETERS NOMINAL |
| FIRST HOLE DIAMETER | 8.50 MILLIMETERS MINIMUM AND 8.75 MILLIMETERS MAXIMUM |
| HEAD STYLE | FLAT |
| HEIGHT | 5.00 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH ENDS DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | EN10083 42CR-04 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | MAIN PIVOT PIN |
| PIN HEAD DIAMETER | 40.00 MILLIMETERS NOMINAL |
| PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND HOLE DIAMETER | 5.00 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | HEAS W/THD AXIAL HOLE |
| STYLE DESIGNATOR | STRAIGHT |
| UNDER HEAD LENGTH | 107.00 MILLIMETERS NOMINAL |